SPAN-MPPC

SPAN­-MPPC Dual-Frequency GNSS/INS Processer Board Stack

End of Life Notice: For more information, click here

The SPAN-MPPC connects directly to our SPAN® OEMV­-3 receiver board to create a powerful OEM GNSS/INS receiver board stack. With a SPAN supported Inertial Measurement Unit (IMUs) and a dual-frequency GNSS antenna, a continuous GNSS/INS navigation system is created that delivers highly accurate position, velocity and attitude. Raw measurement data or solution data is output over several communication protocols.

Features

  • 85 x 125 x 27 mm in board stack configuration
  • ­Wheel sensor input for ground systems
  • ­UART, USB, Ethernet and CAN Bus peripherals
  • 50 Hz GNSS measurements
  • Supports L-Band, API, RT-20® and RT-2™

Benefits

  • ­Increased processing capability for demanding GNSS/INS applications
  • ­Small form factor ideal for size constrained applications
  • Flexible communication interface broadens deployment options
  • ­Supported by industry's highest level of customer service

Attributes

System Type

Board
GNSS/INS Enabled

General Info

Length (mm)
125.00
Width/Diameter (mm)
85.00
Height (mm)
27.00
Weight (g)
75.00
Typical Power Consumption (W)
8.00

Constellation

GPS
GLONASS

Tracking

Max Num of Frequency
Dual
L-Band
SBAS

Number of Com Ports

Ethernet
1
UART (RS232 - RS422)
5
USB Host
1
USB Device
1

Performance

Accuracy
Single Point L1
Single Point L1/L2
SBAS
DGPS
RT-20®
RT-2 L1TE™
RT-2™
OmniSTAR VBS
OmniSTAR XP
OmniSTAR HP

(RMS)
1.5m
1.2m
0.6m
0.4m
0.2m
2cm+1ppm
1cm+1ppm
0.6m
0.15m
0.1m

SPAN­-MPPC Advantages

Tight coupling of the GNSS and IMU measurements provides more satellite observations and the most accurate, continuous solution possible. The SPAN-­MPPC has many powerful features including GPS + GLONASS capability and NovAtel CORRECT™ with RTK centimetre level positioning performance. A dedicated CPU for real time GNSS/INS processing results in fast data rates and low raw data and solution latency for highly dynamic or time critical applications.

Enhanced Accuracy and Performance

Support for L­-Band such as SBAS improves real­time performance and accuracy. For more demanding applications, our Inertial Explorer® post-processing software from our Waypoint® Product Group can be used to post-process SPAN-­MPPC data to provide the highest level of accuracy.

Variants

SPAN-MPPC
SPAN OEM board level system comprised of our OEMV-3 receiver board stacked on a SPAN platform board
Image_Cached

System Type

Board
 
GNSS/INS Enabled
 

General Info

Length (mm)125.00
Width/Diameter (mm)85.00
Height (mm)27.00
Weight (g)75.00
Typical Power Consumption (W)8.00

Constellation

GPS
 
GLONASS
 

Tracking

L-Band
 
SBAS
 

Number of Com Ports

Ethernet1
UART (RS232 - RS422)5
USB Host1
USB Device1

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

UIMU.png
SPAN IMUs

IMUs from leading manufacturers. Range of performance levels available

Alternate Products

Other similar products which could be used instead of the product, depending on application.

OEM615.png
SPAN® on OEM615

Our smallest form factor, GPS + GLONASS, dual-frequency GNSS/INS receiver board

SPAN-CPT.png
SPAN-CPT

Single Enclosure GNSS + INS Receiver Delivers 3D Position, Velocity and Attitude

 

FlexPak6.png
SPAN on FlexPak6

Small, lightweight housing for our SPAN on OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range

SE.png
SPAN-SE

SPAN engine featuring GPS + GLONASS with AdVance® RTK performance and dedicated CPU; GLONASS and dual antenna options

End of Life Notice: For more information, click here

 

OEM628.png
SPAN® on OEM628

Dual-frequency plus L-Band GNSS/INS receiver board supports GPS, Galileo, GLONASS and Compass. Features our OEMV-2 form factor

Optional Products

Optional products can be added to a system to add or enhance functionality.

Inertial Explorer Thumb
Inertial Explorer®

Expands on the powerful features of GrafNav by adding support for loosely coupled and tightly coupled GNSS/INS processing