OEMStar

OEMStar™ Single-Frequency, Muli-Constellation GNSS Receiver

The OEMStar receiver has the same form factor as NovAtel's OEMV-1 series receivers and uses the OEMV® style command interface. This allows you to easily integrate the OEMStar into existing OEMV-1 series systems. The OEMStar uses SBAS corrections from services such as WAAS and EGNOS.

Features

  • Small form factor
  • Very low power consumption
  • GLIDE™ firmware option
  • API firmware option
  • Receiver Autonomous Integrity Monitoring (RAIM) firmware option

Benefits

  • Increased satellite availability with GLONASS tracking
  • Easy to integrate
  • Form-factor consistent with NovAtel OEMV-1 receivers
  • NovAtel OEMV style command interface

Attributes

System Type

Board

General Info

Length (mm)
71.00
Width/Diameter (mm)
46.00
Height (mm)
13.00
Weight (g)
18.00
Typical Power Consumption (W)
0.36

Constellation

GPS
GLONASS

Tracking

Max Num of Frequency
Single
SBAS

Number of Com Ports

LVTTL
2
USB Device
1

Performance

Accuracy
Single Point L1
SBAS
DGPS

(RMS)
1.5m
0.7m
0.5m

Designed for Integration

The OEMStar receiver has the same form factor as NovAtel's OEMV-1 series receivers and uses the OEMV® style command interface. This allows you to easily integrate the OEMStar into existing OEMV-1 series systems. The OEMStar uses SBAS corrections from services such as WAAS and EGNOS.

Multi-Constellation Performance

The OEMStar features up to 14 channels of L1 GPS only, GLONASS only or combined GPS and GLONASS code and carrier phase tracking for increased positioning accuracy and availability. The position, velocity and time information is available at up to 10 Hz, with a 1 PPS accuracy of 20 ns for GPS and 40 ns for GLONASS. The multiconstellation timing feature lets a user select a primary and secondary constellation for the timing source.

Small Form Factor with Low Power Consumption

The OEMStar measures only 46 by 71 mm, accepts an input voltage between 3.1 and 5.25 VDC and consumes less than 500 mW. This makes the OEMStar an attractive choice for use in handheld and battery powered applications.

Customizing with API

Application Programming Interface (API) functionality is available on the OEMStar. Using a recommended compiler with the API library, an application can be developed in a standard C/C++ environment to run directly from the receiver platform, eliminating system hardware, reducing development time and resulting in faster time to market.

Variants

OEMStarOEMStar-RA
Low Cost, L1 GPS+GLONASS Receiver Enhances Satellite Availability & PositioningOEMStar with right angle RF connector
Image_CachedImage_Cached

System Type

Board
 
 

General Info

Length (mm)71.0071.00
Width/Diameter (mm)46.0046.00
Height (mm)13.0013.00
Weight (g)18.0018.00
Typical Power Consumption (W)0.360.36

Constellation

GPS
 
 
GLONASS
 
 

Tracking

SBAS
 
 

Number of Com Ports

LVTTL22
USB Device11

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

Alternate Products

Other similar products which could be used instead of the product, depending on application.

OEM615.png
OEM615

Compact, Dual-Frequency GNSS Receiver Delivers Robust RTK Functionality

FlexPak-G2.png
FlexPak-G2 with OEMStar

Delivers L1 GPS + GLONASS positioning and measurements in combination with GPS data to provide increased satellite availability for positioning in challenging environments.

Accessories

Accessories can be purchased to support your product development efforts or assist in product integration.

DevKit.png
OEM Development Kit

The OEM Development Kit allows quick and easy evaluation of all features of the OEM6, OEMV and OEMStar GNSS cards

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNav Thumb
GrafNav

GrafNav is our static/kinematic baseline processor

GrafNet Thumb
GrafNet

GrafNav Static is a batch static baseline processor and network adjustment package