FlexPak-G2-V2

FlexPak-­G2-­V2 Dual-Frequency GNSS Receiver

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

The FlexPak-­G2-­V2 offers dual-frequency GPS + GLONASS tracking, modernized to support GPS L2C, allowing stronger signal tracking. Available with NovAtel's CORRECT™ with RTK for centimetre level accuracy with fast initialization over extended baselines. As with all four FlexPak-­G2™ variants, the FlexPak-­G2-­V2 is software upgradable in the field to provide the custom performance your application demands.

Features

  • L1, L2, L2C and SBAS tracking
  • GPS + GLONASS
  • RT­-2™, RT­-2 Lite, RT­-20®, ALIGN®, API, GLIDE™ and 50 Hz firmware options
  • Shock and dust resistant; waterproof to IPX7
  • Easily upgradable to the FlexPak6™ receiver

Benefits

  • Multi­constellation tracking yields higher solution availability and reliability
  • Upgradable receiver model ensures easy updating for full L2C deployment
  • Compact, lightweight form factor ideal for low payload UAV and robotics applications
  • Supported by industry's highest level of customer service

Attributes

System Type

Enclosed

General Info

Length (mm)
147.00
Width/Diameter (mm)
113.00
Height (mm)
45.00
Weight (g)
338.00
Typical Power Consumption (W)
2.00

Constellation

GPS
GLONASS

Tracking

SBAS

Number of Com Ports

RS-232
2
USB Device
1
Supports RS-422 (mode pin)

Performance

Accuracy
Single Point L1
Single Point L1/L2
SBAS
DGPS
RT-20®
RT-2 L1TE™
RT-2™

(RMS)
1.5m
1.2m
0.6m
0.4m
0.2m
2cm+1ppm
1cm+1ppm

Base Station or Rover Performance

All FlexPak-­G2 models are capable of base station or rover operation. Using standardized RTCM 2.3, RTCMV3 and CMR+ message types, the FlexPak­-G2 is compatible with all NovAtel and third party GNSS receivers.

Enhanced Connectivity

Two standard DB9 communication ports support power in and out. One port may be dedicated to powering and communicating with a radio, while the other may be dedicated to your host application. Independent input/output and USB ports may be used simultaneously for time synchronization and direct connection to your laptop for field operation.

Variants

FlexPak-G2-V2
Provides dual-frequency GPS + GLONASS tracking, modernized to support GPS L2C, allowing stronger signal tracking.
Image_Cached

System Type

Enclosed
 

General Info

Length (mm)147.00
Width/Diameter (mm)113.00
Height (mm)45.00
Weight (g)338.00
Typical Power Consumption (W)2.00

Constellation

GPS
 
GLONASS
 

Tracking

SBAS
 

Number of Com Ports

RS-2322
USB Device1
Supports RS-422 (mode pin)
 

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

Alternate Products

Other similar products which could be used instead of the product, depending on application.

OEMV-2.png
OEMV-2

Low power, dual frequency GNSS receiver board. Configurable as GPS or GPS + GLONASS. Delivers robust RTK functionality

End of Life Notice: For more information, click here

FlexPak6.png
FlexPak6

Small, lightweight housing for our OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range

OEMV-2.png
SPAN® on OEMV-2

Tracks L1 and L2 signals. Available with RTK, heading and smooth positioning firmware options

End of Life Notice: For more information, click here

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNavv3.png
GrafNav®

GrafNav is our static/kinematic baseline processor

Grafnetv3.png
GrafNet®

GrafNav Static is a network adjustment software package