FlexPak-G2-V1G

FlexPak-G2-­V1G Single-Frequency GNSS Receiver

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

The FlexPak­-G2­-V1G provides GPS + GLONASS L1 tracking for reliable positioning, even in obstructed sky conditions. NovAtel's RT­2 L1TE™ L1-­only RTK algorithm allows reliable centimetre level accuracy for high precision applications. As with all four FlexPak­-G2™ variants, the FlexPak­-G2­-V1G is software upgradable in the field to provide the custom performance your application demands.

Features

  • ­ L1 and SBAS tracking
  • ­ GPS + GLONASS
  • ­ RT-­2 Lite, RT-­20®, ALIGN®, API, GLIDE™ and 50 Hz firmware options
  • ­ Shock and dust resistant; waterproof to IPX7
  • ­ Easily upgradable to the FlexPak6™ receiver

Benefits

  • ­ Multi­-constellation tracking yields higher solution availability and reliability
  • ­ Low power consumption for longer operation time
  • ­ Small, lightweight form factor ideal for size constrained applications
  • ­ Supported by industry's highest level of customer service

Attributes

System Type

Enclosed

General Info

Length (mm)
147.00
Width/Diameter (mm)
113.00
Height (mm)
45.00
Weight (g)
331.00
Typical Power Consumption (W)
1.20

Constellation

GPS
GLONASS

Tracking

Max Num of Frequency
Single
SBAS

Number of Com Ports

RS-232
2
USB Device
1
Supports RS-422 (mode pin)

Performance

Accuracy
Single Point L1
SBAS
DGPS
RT-20®
RT-2 L1TE

(RMS)
1.5m
0.6m
0.4m
0.2m
2cm+1ppm

Base Station or Rover Performance

All FlexPak­-G2 models are capable of base station or rover operation. Using standardized RTCM 2.3, RTCMV3 and CMR+ message types, the FlexPak­-G2 is compatible with all NovAtel and third party GNSS receivers.

Enhanced Connectivity

Two standard DB9 communication ports support power in and out. One port may be dedicated to powering and communicating with a radio, while the other may be dedicated to your host application. Independent input/output and USB ports may be used simultaneously for time synchronization and direct connection to your laptop for field operation.

Variants

FlexPak-G2-V1G
Provides GPS + GLONASS L1 tracking for reliable positioning, even in obstructed sky conditions.
Image_Cached

System Type

Enclosed
 

General Info

Length (mm)147.00
Width/Diameter (mm)113.00
Height (mm)45.00
Weight (g)331.00
Typical Power Consumption (W)1.20

Constellation

GPS
 
GLONASS
 

Tracking

SBAS
 

Number of Com Ports

RS-2322
USB Device1
Supports RS-422 (mode pin)
 

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

Alternate Products

Other similar products which could be used instead of the product, depending on application.

FlexPak6.png
FlexPak6

Small, lightweight housing for our OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range

OEMV-1.png
OEMV-1G

Compact, single frequency GPS + GLONASS high precision GNSS receiver board. One of three variants of the OEMV-1 series

End of Life Notice: For more information, click here

FlexPak-G2.png
FlexPak-G2 with OEMStar

Delivers L1 GPS + GLONASS positioning and measurements in combination with GPS data to provide increased satellite availability for positioning in challenging environments.

SMART-V1.png
SMART-V1G

Integrated L1 GPS + GLONASS receiver and GNSS antenna available with an RS-232 or RS-422 interface with support for USB

End of Life Notice: For more information, click here

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNav Thumb
GrafNav

GrafNav is our static/kinematic baseline processor

GrafNet Thumb
GrafNet

GrafNav Static is a batch static baseline processor and network adjustment package