PPS Pulse Width Control

The 1PPS pulse width is configurable by the users in PPSCONTROL command in the 3.400 and later firmware for OEMV receivers. The pulse width is in the units of microseconds (for example: enter 1000 for 1ms pulse width). The default is a 1ms pulse width when the parameter entered is 0. Pulse width should not be greater than half the period. The command format is as follows: PPSCONTROL switch [polarity] [rate] [pulse width]

The Pulse Width parameter details can be found starting on Page 164 of the OEMV Firmware Reference Manual found here:

http://www.novatel.com/assets/Documents/Manuals/om-20000094.pdf