OEMV Family In-Rush Power Consumption

The list below shows the maximum in-rush power consumption for each OEMV product, which is (very briefly) higher than the published steady state power requirements: 

• OEMV1 7.2 A for less than 60 μs 
• OEMV1G 7.5 A for less than 60 μs 
• OEMV2 22 A for less than 30 μs 
• OEMV3 21 A for less than 70 μs 
• ProPak-V3 19 A for less than 80 μs 
• SMART-V1/V1G 15 A for less than 250 μs 
• FlexPak-V1/V1G 12 A for less than 80 μs 
• FlexPak-V2 13 A for less than 80 μs 

The test conditions used a supply voltage of 12 V (except for OEMV-1and OEMV-1G which were supplied 3.3 V). Enclosure products were tested with the standard 12 V power cable (NovAtel part numbers 01017474 or 01017374).