SMART-MR10

SMART-MR10 Triple-Frequency + L-Band GNSS Receiver and Antenna Combined

End of Life Notice: For more information, click here

The SMART-MR10 is a GPS + GLONASS L1/L2/L5 + L-Band integrated receiver and antenna in a rugged enclosure. The durable GNSS receiver is designed for on-machine agriculture, construction and mining applications.

Features

  • +9 to +36 VDC
  • L1, L2, L2C, L5, L-Band and SBAS tracking
  • GPS + GLONASS
  • RT-2™, RT-20®, ALIGN®, GL1DE® and 20 Hz firmware options
  • NMEA 0183 RS232 ports and NMEA 2000 CAN Bus port

Benefits

  • Flexible communication interface broadens deployment options
  • Multi-constellation tracking yields higher solution availability and reliability
  • Rugged design for on-machine applications
  • Supported by industry's highest level of customer service
  • Customizable utility software for ease of integration

Attributes

System Type

Enclosed With Antenna

General Info

Length (mm)
232.00
Width/Diameter (mm)
233.00
Height (mm)
89.00
Weight (g)
1900.00
Typical Power Consumption (W)
3.70

Constellation

GPS
GLONASS

Tracking

Max Num of Frequency
Triple
L-Band
SBAS

Number of Com Ports

Bluetooth
1
CAN Bus
1
RS-232
3
Supports RS-422 (mode pin)

Performance

Accuracy
Single Point L1
Single Point L1/L2
SBAS
DGPS
RT-20®
RT-2 L1TE™
RT-2™
OmniSTAR VBS
OmniSTAR XP
OmniSTAR HP

(RMS)
1.5m
1.2m
0.6m
0.4m
0.2m
2cm+1ppm
1cm+1ppm
0.6m
0.15m
0.1m

Upgradeable Performance Options

Scalable positioning accuracies down to 2 cm is available with our AdVance® RTK firmware.

GL1DE® firmware, which uses highly accurate carrier phase measurements, provides ultra-smooth positions and pass-to-pass accuracy for superior performance in agricultural steering and guidance applications. GL1DE functions with SBAS and DGPS and in autonomous situations, bridging through short periods of poor satellite availability.

ALIGN® firmware delivers our industry leading GNSS derived heading information.

Rugged Design for Real Life Conditions

Designed to perform in challenging on-machine environments, the SMART-MR10 has a metal base combined with a rugged 23-pin connector, daylight readable LEDs and integrated Bluetooth communications. It is IP67 rated in addition to being qualified against many MIL-STD-810G environmental standards. The SMART-MR10 has an input voltage range from +9 to +36 VDC for seamless operation on both 12 and 24 V machines. It complies with vehicular standards ISO 7637 and ISO 15003 which relate to electrical surges and abnormal electrical conditions.

Variants

SMART-MR10
Integrated GPS + GLONASS L1 + L2 + L5 + L-Band receiver and antenna for challenging on-machine agriculture, mining and construction applications
Image_Cached

System Type

Enclosed With Antenna
 

General Info

Length (mm)232.00
Width/Diameter (mm)233.00
Height (mm)89.00
Weight (g)1900.00
Typical Power Consumption (W)3.70

Constellation

GPS
 
GLONASS
 

Tracking

L-Band
 
SBAS
 

Number of Com Ports

Bluetooth1
CAN Bus1
RS-2323
Supports RS-422 (mode pin)
 

Alternate Products

Other similar products which could be used instead of the product, depending on application.

OEMV-3.png
OEMV-3

Tracks GPS L1, L2, L2C, and L5 signals, and GLONASS L1 and L2. Integrated L-Band and multi-frequency tracking loadable through firmware upgrades, eliminates the need for future hardware changes

End of Life Notice: For more information, click here

SPAN-CPT.png
SPAN-CPT

Single Enclosure GNSS + INS Receiver Delivers 3D Position, Velocity and Attitude

 

SE.png
SPAN-SE

SPAN engine featuring GPS + GLONASS with AdVance® RTK performance and dedicated CPU; GLONASS and dual antenna options

End of Life Notice: For more information, click here

 

ProPak-V3.png
SPAN on ProPak-V3

Tightly coupled GPS/INS engine with OEMV-3 GNSS receiver technology inside

End of Life Notice: For more information, click here

SMARTMR-15.png
SMART-MR15

Integrated GPS + GLONASS L1 + L2 + +L5 L-Band receiver and GNSS antenna with embedded cellular connectivity ideal for difficult on-machine industrial environment

End of Life Notice: For more information, click here

SE.png
SE

Rugged card GNSS receiver features GPS + GLONASS with AdVance® RTK performance and dedicated CPU. Outputs raw measurement data or solution data over several communication protocols or to a removable SD card

End of Life Notice: For more information, click here

DL-V3.png
DL-V3

Rugged aluminum enclosure houses our OEMV-3 GNSS card. Features flexible connectivity through serial, USB, Ethernet and Bluetooth interfaces. Designed for base station and rover applications

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

ProPak-V3.png
ProPak-V3

Triple-frequency measurement and positioning receiver housed in a durable metal enclosure. Upgradeable to SPAN

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNavv3.png
GrafNav®

GrafNav is our static/kinematic baseline processor

Grafnetv3.png
GrafNet®

GrafNav Static is a network adjustment software package