FlexPak6

FlexPak6™ Triple-Frequency + L Band GNSS Receiver

The compact FlexPak6 receiver houses our OEM628™ triple-frequency plus L-Band GNSS receiver board. It tracks all current and future GNSS constellations, with a highly configurable interface to ensure positioning and integration needs are met now and into the future.

Features

  • L1, L2 and L2C, L5 signal tracking
  • RT-2™, ALIGN®, GLIDE™, RAIM and 100 Hz firmware options
  • GPS + GLONASS (Galileo and Compass ready), L-Band Tracking

Benefits

  • Flexible communication interface broadens deployment options
  • Multi-constellation tracking provides higher solution availability and reliability
  • Upgradable receiver firmware ensures easy updating to future signals
  • 100 Hz measurements for high dynamic applications
  • Supported by industry's highest level of customer service

Attributes

System Type

Enclosed

General Info

Length (mm)
147.00
Width/Diameter (mm)
113.00
Height (mm)
45.00
Weight (g)
337.00
Typical Power Consumption (W)
1.80

Constellation

GPS
GLONASS
Galileo
BeiDou

Tracking

Max Num of Frequency
Triple
L-Band
SBAS
QZSS

Number of Com Ports

CAN Bus
1
Ethernet
1
RS-232
2
USB Device
1
Supports RS-422 (mode pin)

Performance

Accuracy (RMS)
Single Point L1 1.5m
Single Point L1/L2 1.2m
SBAS 0.6m
DGPS 0.4m
NovAtel CORRECT™
TERRASTAR-C 4cm
Veripos Apex 6cm
RT-2® 1cm+1ppm

Base Station or Rover

Compact and lightweight, the FlexPak6 is well suited for rover applications. With its powerful GNSS engine, onboard NTRIP v1.0 and v2.0 client and server support and enhanced connection options including serial, USB, CAN and Ethernet, the FlexPak6 is also ideal for base station operation.

Flexible Configuration Options for your Application

Proven and innovative NovAtel technology combine to achieve the best in GNSS positioning. NovAtel's industry leading Pulse Aperture Correlator (PAC) multipath mitigation technology is standard and ensures the highest quality measurements and positioning. This technology provides excellent resistance to interference for consistent, accurate and reliable positioning. Configurable options ensure that your positioning and accuracy needs are met at all times.

Variants

FlexPak6
Small, lightweight housing for our OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range
Image_Cached

System Type

Enclosed
 

General Info

Length (mm)147.00
Width/Diameter (mm)113.00
Height (mm)45.00
Weight (g)337.00
Typical Power Consumption (W)1.80

Constellation

GPS
 
GLONASS
 
Galileo
 
BeiDou
 

Tracking

L-Band
 
SBAS
 
QZSS
 

Number of Com Ports

CAN Bus1
Ethernet1
RS-2322
USB Device1
Supports RS-422 (mode pin)
 

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

Alternate Products

Other similar products which could be used instead of the product, depending on application.

GPStation-6.png
GPStation-6™

Next generation GNSS Ionospheric Scintillation and TEC Monitor (GISTM) receiver

OEM628.png
OEM628

Triple-frequency plus L-Band GNSS receiver board supports GPS, Galileo, GLONASS and BeiDou. Features our OEMV-2 form factor

FlexPak6.png
SPAN on FlexPak6

Small, lightweight housing for our SPAN on OEM628 GNSS receiver. Includes Ethernet and CAN Bus connectivity and features a wide input voltage range

OEM628.png
SPAN® on OEM628

Dual-frequency plus L-Band GNSS/INS receiver board supports GPS, Galileo, GLONASS and Compass. Features our OEMV-2 form factor

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNavv3.png
GrafNav®

GrafNav is our static/kinematic baseline processor

Grafnetv3.png
GrafNet®

GrafNav Static is a network adjustment software package