DL-V3

DL-V3 Triple-Frequency GNSS Receiver

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

NovAtel's DL-V3 is a general purpose high performance GNSS receiver particularly suited for base station and rover applications. The DL-V3 incorporates NovAtel's OEMV-3 receiver board housed in a rugged aluminum enclosure. The DL-V3 provides flexible connectivity options through Serial, USB, Ethernet and Bluetooth interfaces.

Features

  • L1, L2, L2C, L5, L-Band and SBAS signal tracking
  • GPS only or GPS + GLONASS
  • RT-2™, RT-20®, ALIGN®, GLIDE™ and 50 Hz firmware options
  • Serial, Ethernet, USB and Bluetooth capable
  • 2 GB Compact Flash card to store logged data

Benefits

  • Flexible communication interface broadens deployment options
  • Multi-constellation tracking yields higher solution availability and reliability
  • Removable memory provided for data security and portability
  • Excellent multipath mitigation provides superior tracking performance and increased accuracy in high multipath environments, such as in forests and urban canyons
  • Supported by industry's highest level of customer service

Attributes

System Type

Enclosed

General Info

Length (mm)
185.00
Width/Diameter (mm)
162.00
Height (mm)
76.00
Weight (g)
1300.00
Typical Power Consumption (W)
3.50

Constellation

GPS
GLONASS

Tracking

Max Num of Frequency
Triple
L-Band
SBAS

Number of Com Ports

Bluetooth
1
Ethernet
1
RS-232
3
USB Device
1

Performance

Accuracy
Single Point L1
Single Point L1/L2
SBAS
DGPS
RT-20®
RT-2 L1TE™
RT-2™
OmniSTAR VBS
OmniSTAR XP
OmniSTAR HP

(RMS)
1.5m
1.2m
0.6m
0.4m
0.2m
2cm+1ppm
1cm+1ppm
0.6m
0.15m
0.1m

Designed for Flexibility

The DL-V3 provides several interfaces including Bluetooth for close-in wireless connectivity and Ethernet for remote network based receiver access. The DL-V3 also features colored LEDs to indicate receiver status at a glance.

GNSS Compatibility

Positioning signals from both GPS and GLONASS constellations provide maximum flexibility and enhanced positioning in challenging environments. L2C and L5 GPS signals can also be tracked.

Sub-Metre Performance

The DL-V3 can provide sub-metre position solutions using L-Band correction services. For applications requiring higher accuracies, our RT-20 and RT-2 Real-Time Kinematic (RTK) solutions can provide real time centimetre level positions at data rates of up to 50 Hz.

 

Variants

DL-V3
Rugged aluminum enclosure houses our OEMV-3 GNSS card. Features flexible connectivity through serial, USB, Ethernet and Bluetooth interfaces. Designed for base station and rover applications
Image_Cached

System Type

Enclosed
 

General Info

Length (mm)185.00
Width/Diameter (mm)162.00
Height (mm)76.00
Weight (g)1300.00
Typical Power Consumption (W)3.50

Constellation

GPS
 
GLONASS
 

Tracking

L-Band
 
SBAS
 

Number of Com Ports

Bluetooth1
Ethernet1
RS-2323
USB Device1

Supporting Products

Other product categories which are required with this product to create a complete system.

Vexxis Series
Antennas

GNSS receiver performance is dependent on your choice of antenna. We offer high performance, compact, low cost and ground reference station antennas. Our anti-jam antenna is available for military or homeland security applications

Alternate Products

Other similar products which could be used instead of the product, depending on application.

OEMV-3.png
OEMV-3

Tracks GPS L1, L2, L2C, and L5 signals, and GLONASS L1 and L2. Integrated L-Band and multi-frequency tracking loadable through firmware upgrades, eliminates the need for future hardware changes

End of Life Notice: For more information, click here

SPAN-CPT.png
SPAN-CPT

Single Enclosure GNSS + INS Receiver Delivers 3D Position, Velocity and Attitude

 

SE.png
SPAN-SE

SPAN engine featuring GPS + GLONASS with AdVance® RTK performance and dedicated CPU; GLONASS and dual antenna options

End of Life Notice: For more information, click here

 

ProPak-V3.png
SPAN on ProPak-V3

Tightly coupled GPS/INS engine with OEMV-3 GNSS receiver technology inside

End of Life Notice: For more information, click here

SMARTMR-15.png
SMART-MR15

Integrated GPS + GLONASS L1 + L2 + +L5 L-Band receiver and GNSS antenna with embedded cellular connectivity ideal for difficult on-machine industrial environment

End of Life Notice: For more information, click here

SMARTMR-10.png
SMART-MR10

Integrated GPS + GLONASS L1 + L2 + L5 + L-Band receiver and antenna for challenging on-machine agriculture, mining and construction applications

End of Life Notice: For more information, click here

SE.png
SE

Rugged card GNSS receiver features GPS + GLONASS with AdVance® RTK performance and dedicated CPU. Outputs raw measurement data or solution data over several communication protocols or to a removable SD card

End of Life Notice: For more information, click here

ProPak-V3.png
ProPak-V3

Triple-frequency measurement and positioning receiver housed in a durable metal enclosure. Upgradeable to SPAN

End of Life Notice: For more information, click here

End of Life Notice: For more information, click here

Optional Products

Optional products can be added to a system to add or enhance functionality.

GrafNav Thumb
GrafNav

GrafNav is our static/kinematic baseline processor

GrafNet Thumb
GrafNet

GrafNav Static is a batch static baseline processor and network adjustment package